Differences

This shows you the differences between two versions of the page.

--- manuals:vps:vpsadminos [2018/05/21 08:12] – [General] /proc/cpuinfo,stat Aither
+++ manuals:vps:vpsadminos [2018/09/30 13:11] – Removed network configuration Aither
@@ Line 47: / Line 47: @@
 ===== Changes in VPS behaviour =====
-==== Network configuration ====
-Linux kernel doesn't have anything like venet from OpenVZ, so we had to
-find a different way. Networking is done by a pair of veth interfaces:
-one on the host, the other in the VPS. IP addresses are routed through
-an interconnecting network that is assigned to every VPS.
-For example, let's say the assigned interconnecting network is
-''10.100.10.0/30''. The veth interface on the host will have address
-''10.100.10.1'' and the interface in the VPS will have ''10.100.10.2''.
-IP addresses are then routed via ''10.100.10.2'', e.g. public IPv4 ''1.2.3.4''
-would be routed as ''1.2.3.4/32 via 10.100.10.2''. The default gateway
-in the VPS would be set as ''default via 10.100.10.1 src 1.2.3.4''. The
-interface on the host is configured automatically by ''osctl'', which
-will also generate configuration files inside your VPS, depending on your
-distribution. The init system from your VPS will then read those files
-and setup the network interface. The first address on the interface will be
-the address from the interconnecting network, not the public address, as has
-been the case on OpenVZ. If you have some custom network configuration,
-you need to be aware of how the networking is supposed to work.
 ==== User namespaces ====
 VPS in vpsAdminOS are using so called //user namespaces//. User namespace
@@ Line 147: / Line 127: @@
 distribution into ''osctl'', so that it can configure hostname, network, DNS
 resolvers, etc., see [[https://vpsadminos.org/osctld/distributions/|doc]].
+==== Features ====
+Features can be turned on/off individually. When any change is made, the VPS restarts.
+{{ :navody:vps:features.png?300 |}}
+  * Docker (experimental) - Enables trial support for Docker.
+  * FUSE - "Filesystem in Userspace" Enables the kernel module to allow non-privileged users create their own file systems.
+  * KVM - "Kernel-based Virtual Machine" Enables KVM for hardware support of virtualization.
+  * LXC nesting - "Linux Containers" Enables nested LXC containers.
+  * PPP - "Point-to-Point Protocol" Enables communications protocol used to establish a direct connection between point-to-point links.
+  * TUN/TAP - "TUN routing/TAP bridging" Enables the creation of virtual interfaces that are then bridged.
+We recommend only setting the features that your really need.
 ==== More about vpsAdminOS ====

Knowledge base

User Tools

Site Tools

Differences

Page Tools